Aave is a decentralized, non-custodial lending protocol: users supply crypto such as WETH or USDC to shared pools and earn interest, and other users borrow from those pools by locking more value as collateral than they take out. It went live on Ethereum mainnet on January 8, 2020, and on November 21, 2026 its V3 markets held $15.1 billion across 21 networks (DefiLlama). WETH supplied to the Aave V3 Ethereum market earned 1.48% APY that day, paid by borrowers who were paying 2.03%.
- Two sides: suppliers earn the interest borrowers pay, minus the reserve factor that goes to the Aave treasury (15% for WETH on Aave V3 Ethereum).
- Receipt token: supplying WETH mints aWETH, an ERC-20 whose balance grows as interest accrues; withdrawing burns it and returns WETH.
- Loans are overcollateralized: against WETH you can borrow up to 81% of its value, and the position is liquidated when the health factor drops below 1 (84% liquidation threshold, 5% bonus to the liquidator).
- Size: 2,140,205 WETH were supplied and 1,838,723 WETH borrowed on Aave V3 Ethereum on November 21, 2026, a utilization of 85.9% (Pool contract, block 26,466,719).
What Aave Is
Aave is a set of smart contracts that runs a money market without a company in the middle. Aave’s documentation describes it as “a decentralized, non-custodial liquidity protocol where users supply assets to earn yield and borrow against collateral”. Aave Labs, the team that earlier built ETHLend, wrote the first version, and the protocol launched on Ethereum mainnet on January 8, 2020 (Aave changelog).
Non-custodial means that no one at Aave can move a user’s position. Funds sit in the pool contracts, and only the address that supplied them can withdraw them. Aave’s security page states that no central party can freeze or alter individual user positions; governance can only change parameters of a whole market, such as pausing a reserve.
Aave V3 is the version most people use, and every number on this page comes from the Aave V3 Ethereum market. Aave V4, a new design built around liquidity hubs and spokes, went live on Ethereum mainnet on March 30, 2026 and later on Avalanche, Arc and Base (Aave changelog).
Why Aave Uses WETH, Not ETH
Aave pools are written against the ERC-20 interface, so the market for Ether is a WETH market. When you supply, the Pool contract pulls the token from your address with transferFrom(), a function that native ETH does not have (why WETH exists). The WETH reserve on Aave V3 Ethereum is the canonical WETH9 contract, 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2.
Two consequences follow. First, the first supply of WETH needs an approval transaction that lets the Pool spend your WETH (approvals and allowances). Second, what you receive back is aWETH, not WETH: a separate token that the lookalikes table lists as Aave’s receipt token. aWETH cannot be unwrapped into ETH directly; it is first withdrawn from Aave, which returns WETH.
How Supplying Works: aTokens and Interest
Supplying an asset to Aave mints the same amount of its aToken, which Aave defines as an interest-bearing ERC-20 token whose balance increases over time. Supply 10 WETH and your wallet shows 10 aWETH; a year later at a steady 1.48% APY it would show about 10.148 aWETH, without any claim transaction. Withdrawing burns the aWETH and returns the same amount of WETH, interest included.
The rate is not fixed. Aave sets it from utilization, the share of the pool that is lent out: the more is borrowed, the higher the rate for both sides, with a steeper curve above an optimal point. Aave’s FAQ puts it plainly: the higher the utilization of a reserve, the higher the yield for suppliers. The table shows the WETH reserve on November 21, 2026.
| WETH on Aave V3 Ethereum | Value |
|---|---|
| Supplied (aWETH supply) | 2,140,205.54 WETH |
| Borrowed (variable debt) | 1,838,723.42 WETH |
| Utilization | 85.9% |
| Supply APY | 1.48% |
| Variable borrow APY | 2.03% |
| Reserve factor | 15% |
Source: Aave V3 Pool and token contracts on Ethereum, block 26,466,719, November 21, 2026; APY compounded per second from the on-chain rate.
The gap between 2.03% and 1.48% is not a fee hidden from suppliers. Suppliers are paid what borrowers pay, minus the reserve factor, and spread over the whole pool, including the part that is not lent out at the moment.
How to Earn on Aave
There are three ways to earn on Aave, and they carry different risks. The table compares them; the sections below explain each one.
| Way | What you do | Where the return comes from | Main risk |
|---|---|---|---|
| Supply | Deposit WETH, USDC or another asset, receive aTokens | Interest paid by borrowers | Smart contract risk; withdrawal waits if the pool is fully borrowed |
| Stake in Umbrella | Stake aTokens (such as aWETH) or GHO as protocol insurance | Rewards on top of the supply rate | Slashing if a deficit appears; 20-day cooldown |
| Borrow against collateral | Lock WETH, borrow stablecoins or another asset | Whatever you do with the borrowed funds | Liquidation when the health factor falls below 1 |
Supplying WETH
Supplying is the simplest way to earn on Aave: you lend your WETH to the pool and receive the supply rate. A step-by-step version in a self-custody wallet such as WETH Wallet looks like this:
- Hold WETH on Ethereum, plus a little ETH for gas. If you have only ETH, wrap it first (how wrapping works).
- Open app.aave.com and connect the wallet through WalletConnect.
- Choose the Ethereum market, find WETH and tap Supply.
- Approve WETH once, then confirm the supply; aWETH appears in the wallet.
The WETH stays yours: it is withdrawn the same way, as long as the pool has unborrowed WETH. On November 21, 2026, 14.1% of the supplied WETH was not lent out and could be withdrawn at once. Supply caps set by governance may also stop new deposits when a market is full.
Staking in Umbrella
Staking on Aave means putting tokens behind the protocol as insurance in exchange for extra rewards. Umbrella, the system that replaces the older Safety Module, accepts aTokens and GHO on Ethereum; WETH is one of the covered assets, along with USDC, USDT and GHO (Aave docs). If a bad debt appears in the covered pool, the stake of that pool can be slashed to cover it, after an offset paid by the DAO first. Unstaking starts a 20-day cooldown, followed by a 2-day window to withdraw.
Staking AAVE, the governance token, in the legacy Safety Module (stkAAVE) still works during the transition. Aave’s FAQ notes that the Safety Module has never been slashed.
Borrowing Against WETH
Borrowing does not pay you interest; it lets you use your WETH as collateral without selling it. Every loan on Aave is overcollateralized: on Aave V3 Ethereum, WETH has a loan-to-value (LTV) of 81%, so 10 WETH let you borrow up to 81% of their value. Interest is variable; stable rates were removed in Aave V3.2 on October 8, 2024.
Health Factor and Liquidation
The health factor is the number that decides whether a loan survives. Aave defines it as total collateral value times the weighted liquidation threshold, divided by total borrow value. Above 1 the position is safe; below 1 anyone can liquidate it: repay part of the debt and take collateral at a discount, the liquidation bonus. For WETH the liquidation threshold is 84% and the bonus is 5%.
A worked example at the ETH price of November 21, 2026 ($1,680.46, DefiLlama):
| Step | Value |
|---|---|
| Collateral: 10 WETH | $16,804.60 |
| Maximum borrow at 81% LTV | $13,611.73 |
| Borrowed: 8,000 USDC | $8,000.00 |
| Health factor: 16,804.60 x 0.84 / 8,000 | 1.76 |
| ETH price at which the health factor reaches 1 | $952.38 |
If ETH falls to $952.38, the health factor hits 1 and the loan can be liquidated. Up to 50% of the debt is repaid in one liquidation while the health factor is above 0.95 and both collateral and debt are worth at least $2,000; below 0.95, or under $2,000, up to 100% (Aave FAQ). The borrower keeps the borrowed USDC but loses the collateral that was sold, plus the 5% bonus taken by the liquidator.
Risks and Limits
Aave’s own documentation says that smart contract risk cannot be eliminated. The risks below apply to anyone who supplies, stakes or borrows:
- Smart contract risk: the code has passed more than 65 independent audits and reviews and runs a bug bounty of up to $5 million (Aave security page), but a bug can still cost funds.
- Liquidation: a loan against WETH is closed in part when the ETH price falls far enough, and the 5% bonus is paid from the borrower’s collateral.
- Liquidity: when utilization is close to 100%, suppliers wait for borrowers to repay or for new deposits before they can withdraw.
- Variable rates: the 1.48% on November 21, 2026 is a snapshot; it moves every block with utilization.
- Slashing: a stake in Umbrella can lose part of its value if the covered pool runs a deficit.
- Lookalike tokens: aWETH is a position in Aave, not WETH; sending aWETH to an exchange that expects WETH may not be credited (lookalikes table).